There are many reports of Xiaomi Redmi 7A owners having many network signal problems all the time, so we come up with this article to provide a comprehensive range of solutions. If you are a mobile technician and looking for a solution to troubleshoot your Xiaomi Redmi 7A losing signal, this troubleshooting guide might be helpful. Find out what you can do by following our recommendations below.
The solution in this post can help fix and fix the Xiaomi Redmi 7A that loses signal. Before you can continue using this solution, make sure that your device's software is fine, restored, or flashed and updated. This solution can only work if the device gets into water or the user drops it on the ground.
Xiaomi Redmi 7A Network Ways, only emergency call and no signal error are among the common problems encountered by Xiaomi Redmi 7A smartphone users regardless of the brand and operating system under which the device is located. running. These errors are also tagged among other network related problems on mobile devices. When this issue occurs, you won't be able to send and receive text messages, make or receive calls on your device.
Xiaomi Redmi 7A lost signal
- There is no network on your phone.
- Poor signal.
- The phone only searches for the network, but is not connected.
- The signal drops continuously.
- The call could not be made.
Reasons for Xiaomi Redmi 7A network problem
- Your SIM card may be faulty.
- Your network operator may be experiencing problems.
- The GSM antenna contact may be rusty or may have some dirt on it.
- The antenna contacts are not in full contact with the GSM antenna contacts.
- Any coils and capacitors of the antenna network or the Power Amp IC can be faulty.
- The secondary coil antenna may be faulty.
Repair Xiaomi Redmi 7A signal problems
- Reboot your Xiaomi Redmi 7A phone and check.
- Remove and reinsert the SIM card and test.
- Switch between different network modes and test.
- Check if another SIM card is working and your SIM card or network operator may be having problems.
- Xiaomi Redmi 7A Jumper network problems solutions
How to troubleshoot Xiaomi Redmi 7A network
Make sure the device's software is ok, restored or flashed successfully.
 |
| Xiaomi Redmi 7A Network Ways |
 |
| Xiaomi Redmi 7A Network Ways |
 |
| Xiaomi Redmi 7A Network Ways |
Try to upgrade to higher version and burn flash files just fine. If the software has been updated but the problem is not fixed, you can proceed to monitor, check or replace the respective components shown in the solution above.
Make sure that the PCB board is in good condition and is not bent or damaged.
Also, check for oxidation build-up, clean it up before you can continue. First check the PA supply voltage, this is coming from the antenna terminal and you can monitor it between the capacitors shown in the solution above.
Please note that we will edit these solutions or add new solutions if found on this page at any time in the future. So please come back anytime on this page for updates.
Connect with us
We are always open to your problems, questions and suggestions, so contact us by filling out this form. This is a free service we offer and we will not charge you a dime for it. But please note that we receive hundreds of emails every day and we cannot reply to each one. But rest assured, we have read every message we receive. To those we've helped, please spread the word by sharing our post to your friends or simply liking our Facebook page.
Tags:
Xiaomi
