If you have any problem like Samsung Galaxy A32 Charging Ways, not charging or charging slowly… we will give you suggestions on how to solve this problem with your phone. For example, you won't be able to charge your phone using its direct USB charger, using a universal charger will become impossible when you're using a phone powered by an existing battery.
When a high-end device like Samsung Galaxy A32 A325F won't charge, Charging ways to solve the problem could be with its hardware and accessories or it could just be a minor issue with the software. As an owner, you should do some troubleshooting procedures to determine what the problem is and hopefully fix it.
Causes of Samsung Galaxy A32 charging problems
There are four basic hardware-related reasons why your Samsung Galaxy A32 might charge slowly and I will explain each one in turn and in ascending order of probability.
- There is dirt or debris stuck in the charging port.
- The charger is damaged or defective.
- The USB cable no longer works.
- You are using a non-genuine charger.
Solutions to Troubleshoot Samsung Galaxy A32 that won't charge
In the image below, we will share with you the Samsung Galaxy A32 A325F charging circuit and check the jumper continuity with a multimeter if there is any damage causing a short circuit on the motherboard Samsung Galaxy A32.
First, open your cell phone
Then clean the charging connector part of the mobile motherboard
Next, remove the old charging connector and add a new one
1. Check the USB charging port
The cause of damage to the flex charging Samsung Galaxy A32 may be due to the wear of the USB port.
Possible corrosion due to water ingress damage the charging pin or short circuit voltage transmission.
As a result, the circuit breaks and voltage cannot be transmitted or saved to the phone's battery.
Change the charging USB port immediately, if it is damaged and does not cause problems with the phone charger.
2. Check the components in the charging circuit
Do a check of the circuit on the board if there is damage or the lines are disconnected, apply the wiring method on the PCB board. And also check the components that can cause damage to the charger, replace components.
On the schematic image listed above, there is a faulty component of the Samsung Galaxy A32 phone that won't charge. Then, for your best move, immediately replace the defective part with a replacement part in good condition.
 |
| Samsung Galaxy A32 Charging Ways |
Doing some of the above can fix Samsung Galaxy A32 not charging error, make sure you have checked the damage carefully. Use a multimeter to measure the components on each component and the path on the PCB board is damaged.
Above are some ways to fix Samsung Galaxy A32 error that won't charge because damage like this happens very often. For more information and new tips and tricks on solving problems of other Android phones. Continue to visit this page. We will update it if there is a new update.
Tags:
Samsung
