In this post we will share with you the Xiaomi Poco M3 Network Ways... Before using this solution, make sure that your device's software has been installed. restore, flash or update. This solution can only work if the device is dropped in water or hit hard by the user.
Xiaomi Poco M3 no service, only emergency call and signal failure are among the common problems encountered by smartphone users regardless of the brand and operating system under which the device is running. When this issue occurs, you won't be able to send and receive text messages, make or receive calls on your device.
Signs of Xiaomi Poco M3 network error
- There is no network on your phone.
- Weak signal.
- The phone only searches for the network, but is not connected.
- The signal drops continuously.
- The call could not be made.
Causes of network problems Xiaomi Poco M3
- Your SIM card may be faulty.
- Your network operator may be experiencing problems.
- The GSM antenna contacts may be rusty or have some dirt on them.
- The antenna contacts are not in full contact with the GSM antenna contacts.
- Any coils and capacitors of the antenna network or the Power Amp IC can be faulty.
- The secondary coil antenna may be faulty.
Xiaomi Poco M3 Network Troubleshooting Solution
- Reboot your Xiaomi Poco M3 phone and check.
- Remove and reinsert the SIM card and check.
- Switch between different network modes and test.
- Check if another SIM card is working
- Finally, your SIM card or network operator may be having problems.
How to fix Xiaomi Poco M3 lost signal
Make sure the device's software is fine or has been restored, flashed successfully. Try to upgrade to higher version and burn flash files just fine.
 |
| Xiaomi Poco M3 Network Ways |
If the software has been checked but the problem is not fixed, you can proceed to check or replace the respective components shown in the solution above.
Make sure that the PCB board is stable and not bent or damaged. Also, check for oxidation, clean it up before you can continue.
First check the PA supply voltage, this is coming from the antenna terminal and you can monitor it between the capacitors shown in the solution above.
Please note that we will update the latest solutions here, please come back anytime on this page for assistance.
Tags:
Xiaomi
