Are you looking for a solution to troubleshoot your Xiaomi Redmi 8A Pro Charging Ways, charging without warning, not charging or charging slowly...
If you face any problem like Xiaomi Redmi 8A Pro not charging, charging paused or charging slow. Below we will give you suggestions on how to solve this problem with your phone. For example, you won't be able to charge your phone using its direct USB charger, using a universal charger will become impossible when you're using a phone powered by an existing battery.
When a high-end device like the Xiaomi Redmi 8A Pro won't charge, the workarounds could be with its hardware and accessories or it could just be a minor problem with the software. As an owner, you should do some troubleshooting procedures to determine what the problem is and hopefully fix it.
Hardware reasons for Xiaomi Redmi 8A Pro charging problem
There are four basic hardware-related reasons why your Xiaomi Redmi 8A Pro may charge slowly and I will explain each of them in turn and in order of increasing probability.
- There is dirt or debris stuck in the charging port.
- The charger is damaged or defective.
- The USB cable no longer works.
- You are using a non-genuine charger.
Xiaomi Redmi 8A Pro not charging problem solution
In the image below we will share with you the Xiaomi Redmi 8A Pro charging solution and check the jumper continuity using a multimeter if there is any damage that damages the jumper on the board Xiaomi Redmi 8A Pro owner.
- First, open your cell phone
- Then clean the charging connector part of the mobile motherboard
- Next, remove the old charging connector and add a new one
Here are some steps to solve Xiaomi Redmi 8A Pro charging problem
1. Check the USB charging port
The cause of the broken Xiaomi Redmi 8A Pro charging pin may not be due to the wear of the USB port. So the line is cut and the voltage cannot be transferred and saved to the battery of the phone. Change the charging USB port immediately, if it is damaged and does not cause problems with the phone charger.
2. Check components and lines
Do a line check on the board if there is damage or the lines are disconnected, apply the wiring on the PCB board. And also check components that may not damage the charging pin, replace components.
 |
| Xiaomi Redmi 8A Pro Charging Ways |
On the schematic image listed above, there is a component that prevents the Xiaomi Redmi 8A Pro from charging. Then, replace the defective part with a replacement part in good condition.
Doing some of the above can fix the problem of Redmi 8A Pro not charging, make sure you have checked the damage carefully. Use a multimeter to measure the components on each component and the path on the PCB board is damaged.
Those are some of the ways to fix Huawei P20 Lite that won't charge because damage like this happens very often. For more information and new tips and tricks on solving problems of other Android phones. Continue to visit this page. We will update it if there is a new update.
Tags:
Xiaomi
