The solution in this post can help you fix and fix your Oppo A37 phone losing signal or weak signal. Before you can continue using this solution, make sure that your device's software is fine, restored, and has been flashed and/or updated. This solution may only work if the device gets into water or falls on the ground.
OPPO A37 Network Ways, only emergency calls and no signal error are among the common problems encountered by Oppo A37 smartphone users regardless of the brand and operating system the device is running on. run. These errors are also tagged among other network related problems on mobile devices. When this issue occurs, you won't be able to send and receive text messages, make or receive calls on your device.
Oppo A37 network problem
- There is no network on your phone.
- Low signal.
- The phone only searches for the network, but is not connected.
- The signal drops continuously.
- Unable to make a call.
Causes of Oppo A37 network problems
- Your SIM card may be faulty.
- Your network operator may be experiencing problems.
- GSM antenna contacts may be rusty or may be contaminated with dirt.
- The antenna contacts do not fully communicate with the GSM antenna contacts.
- Any coils and capacitors of the antenna network or the Power Amp IC can be faulty.
- The secondary coil antenna may be faulty.
Oppo A37 revolutionary problem solution
- Reboot your Oppo A37 phone and check.
- Remove and reinsert the SIM card to test.
- Switch between different network modes and test.
- Check if another SIM card is working.
- Your SIM card or network operator may be having problems.
How to fix network error Oppo A37
Make sure your device's software is fine, has been successfully restored or flashed. Try to upgrade to the latest version and burn the flash files just fine.
 |
| OPPO A37 Network Ways |
 |
| OPPO A37 Network Ways |
 |
| OPPO A37 Network Ways |
If the software has been updated but the problem is not fixed, you can proceed to check or replace the respective components shown in the solution above.
Make sure that the condition of the PCB board is stable and not bent or damaged. Also, check for oxidation build-up, clean it up before you can continue.
First check the PA supply voltage, this is coming from the antenna terminal and you can monitor it between the capacitors shown in the solution above.
Tags:
OPPO
