Here we will share with you the Samsung Galaxy A02 A022F Backlight Ways, backlight not working and screen related problems in case you are dealing with screen problems like blank screen, dark screen, white screen (with tint), no backlight LED due to user getting wet or accidentally dropped.
The problem of failure without backlight usually has symptoms such as LCD screen no display, LCD screen is white. Or in general, there is no light produced by the LCD screen, but ringing and notification sounds can still be heard.
Samsung Galaxy A02 screen light problem solution
To fix the Samsung Galaxy A02 A022F backlight problem, you can try to replace or install a new display first, to easily confirm if the LCD backlight LED is still working or has been damaged. broken. You can also test the LEDs using a multimeter if you can manage without damaging the LCD's flexible connector. If the newly installed LCD is still showing the same problem and the LED is not lit, refer to the solution below and locate the components marked on the PCB board.
Some causes of Samsung Galaxy A02 A022F backlight or screen not working:
- Phone dropped, screen broken.
- The phone has been exposed to water or liquid.
- Damage to internal components.
Step 1: Replace screen Samsung Galaxy A02 A022F
Carry out screen replacement, if there is broken, cracked screen on Samsung Galaxy A02 display light problem is a common problem in smartphones, most of this problem occurs when the phone is dropped in water or any kind of liquid damage. When any smartphone has screen light problem, you would first check all display connectors or motherboard connectors for short or broken lines in LCD lite or as shown in the diagram. disaster or not. If All those lines are ok you will check your mobile phone for water damage Water damaged mobile phone has many form of problem LCD back lite problem is a common problem in this situation. this could be the cause of no damaged screen.
Step 2: Reinstall the software on your Samsung phone
No backlight on Android phone could be caused by a bug in the phone's operating system, you can reinstall it to solve the problem.
Step 3: Check LCD monitor connection
Try to test the whole connection on the PCB board, especially on the LCD screen connection. There may be corrosion or rust in the connector, clean it immediately with liquid alcohol and assist with brushing to get the socket back to a clean condition and take action when the connection comes apart.
Step 4: Check circuit and voltage
The following repair step you can try to check if the line on the Samsung Galaxy A02 A022F Android phone board is damaged.
 |
| Samsung Galaxy A02 A022F Backlight Ways |
In the schematic image of the path connected to each component, you can check using a multimeter. When damage to the path is encountered, then it can be performed path jumper, for the condition to return to normal.
Step 5: Replace components
With the schematic guide above, you can perform a test of connected components. If there are defective components after checking and measuring with a multimeter. You can make new component replacements of the same value. Hopefully with a guide through the schematic picture was given. You've got the best solution to the problem. Please note, Check your phone for any damage carefully, to avoid increasing damage and causing harm to yourself. Thank.
Tags:
Samsung
