There are many reports of Samsung Galaxy A32 SM-A325F experiencing network signal problems, so we put together this article to provide a comprehensive range of solutions. If you are a mobile technician and looking for a solution to troubleshoot Redmi 9A network problems, this troubleshooting guide might be helpful. Find out what you can do by following our recommendations below.
The solution in this post can help fix and fix Samsung Galaxy A32 network problems. Before you can continue using this solution, make sure that your device's software has been flashed or updated. This solution can only work if the device is damaged by water or by heavy user drop.
Samsung Galaxy A32 SM-A325F no service, only emergency calls and no signal error are among the common problems encountered by Samsung Galaxy A32 smartphone users regardless of brand and operating system the device is running. These errors are also tagged among other network related problems on mobile devices. When this issue occurs, you won't be able to send and receive text messages or make or receive calls on your device.
Samsung Galaxy A32 network problems
- There is no network on your phone.
- Low signal.
- The phone only searches for the network, but is not connected.
- The signal drops continuously.
- Call problem.
Reasons for Samsung Galaxy A32 network problems
- Your SIM card may be faulty.
- Your network operator may be experiencing temporary difficulties.
- GSM antenna contacts may be rusty or may have some dirt.
- The antenna lines are not in full contact with the GSM antenna contacts.
- Any coils and capacitors of the antenna network or the Power Amp IC can be faulty.
- The secondary coil antenna may be faulty.
How to fix Samsung Galaxy A32 signal problems
Reboot your Samsung Galaxy A32 phone and check. Remove and reinsert the SIM card and test. Switch between different network modes and test. Check if another SIM card is working and your SIM card or network operator may be having problems.
How to fix Samsung Galaxy A32 network problems
Make sure the device's software is ok or restored, flashed successfully. Try to upgrade to higher version and burn flash files just fine.
 |
| Samsung Galaxy A32 Network Ways |
If software calibration has been performed but nothing seems to happen, you can proceed to monitor, test or replace the respective components shown in the solution above.
Make sure that the PCB board is stable and not bent or damaged.
Also, check for oxidation build-up, clean it up before you can continue.
First check the PA supply voltage, this is coming from the antenna terminal and you can monitor it between the capacitors shown on the solution above
Please note that we will edit these solutions or add new solutions if found on this page at any time in the future. So please come back anytime on this page for updates.
Tags:
Samsung
