By using Test Point Samsung Galaxy S10 G973F you can easily restore stock ROM, bypass FRP or reset user data on your device through UFi Box. In this guide, we will show you how to boot into MTK Download Mode.
If you want to see where the Samsung Galaxy S10 G973F Test Point is located then follow the steps below. Then use them into download mode to perform various functions like flashing firmware, installing custom ROMS/Kernel...
Each phone comes with different developer options like Recovery mode, Fastboot mode/bootloader mode, and EDL mode. All these modes use to perform different test procedures. Some of them can only be used by advanced Android users or mobile developers or repairers, and some of them can be used by normal users.
How to remove pattern and FRP of Samsung Galaxy S10 G973F:
You can use EFT dongle, UMT dongle, octopus FRP tool, MRT key tool to remove FRP and pattern lock from Samsung Galaxy S10 G973F or you can try other tools using above test point to boot your phone you in emergency download mode remove battery missing test point with ground and plug in USB cable.
Test Point Samsung Galaxy S10 G973F - ISP EMMC PinOUT
How to find Test Point Samsung Galaxy S10 G973F.
- Install "Samsung Galaxy S10 MTK USB Drivers" on windows computer.
- Remove the back of the device carefully, making sure that you won't damage any components.
- Now check below screenshot and find Test Point Samsung Galaxy S10.
- Remove the battery and short bot points using any copper wire and attach the USB cable at the same time.
- Now you can freely flash stock ROM on your Samsung Galaxy S10 mobile using any tool.
Using Test Point Samsung Galaxy S10
- Install stock ROMs.
- Flash without unlocking bootloader.
- Installing stock ROM is easy, if device can't boot into fastboot mode or device is stuck on Samsung Logo.
Other ways to enter EDL Mode on Samsung Galaxy S10
Follow the instructions below carefully to boot your device into EDL Mode (Emergency Download Mode)
By Poking Hardware Test Points
In that case, you only have one option left, which is to poke Test Points on the device's mainboard.
- Power off the device if possible.
- Open the back cover of the phone
- Connect 2 test points on the mainboard of the device
- And then plug the USB into your PC
- Once your Qualcomm Android device has entered EDL mode, you can connect it to your PC and use tools like QPST or QFIL to flash software files to extract or restore the original ROM.
Using Adb Mode
- First, install ADB & Fastboot drivers on your PC, then enable USB debugging on your phone.
- Now connect your device to PC using USB Driver.
- Then open command window in PC and paste the following commands and press enter.
adb reboot edl
- If any pop-up appears on phone screen then allow ADB access.
Fastboot mode
- Download ADB and Fastboot Tool then extract it in your PC (C:/Drive)
- Boot your device into bootloader
- Open a command window on your PC on the same unzipped folder (ADB and Fastboot Tools)
- Now enter the command
.\fastboot oem edl
 |
| Samsung Galaxy S10 G973F Test Point |
Note: Just understand that EDL mode flashing is a common method for all Samsung devices. But EDL startup process may be different for different devices. For some devices you can use EDL start command but the problem is that nowadays edl command doesn't work for all latest Huawei smartphones. So checkpoint is the easiest and most perfect method to boot any Vivo phone into edl mode using test terminals.
Tags:
Samsung
