There are many reports of Mi 6X owners having many network signal problems all the time, so we share this article to provide a comprehensive range of solutions. If you are a mobile technician and looking for a solution to troubleshoot Mi 6X network problems, this troubleshooting guide might be helpful. Find out what you can do by following our recommendations below.
The solution in this post can help fix and repair Mi 6X network problems. Before you can continue using this solution, make sure that your device's firmware is fine, restored, and has been flashed and/or updated. This solution may only work if the device was damaged by water or by a heavy user drop.
Mi 6X no service, only emergency calls and no signal errors are among the common problems encountered by users of Mi 6X smartphones regardless of the brand and operating system the device is running on. . These errors are also tagged among other network related problems on mobile devices. When this issue occurs, you won't be able to send and receive text messages or make or receive calls on your device.
Mi 6X Network Issues
- There is no network on your phone.
- Low signal.
- The phone only searches for the network, but is not connected.
- The signal drops continuously.
- Call drop problem.
The reason for the network problem of Xiaomi Mi 6X
- Your SIM card may be faulty.
- Your network operator may be experiencing temporary difficulties.
- The GSM antenna contact may be rusty or may have some powder on it.
- Contacts The antenna lines are not in full contact with the GSM antenna contacts.
- Any coils and capacitors of the antenna network or the Power Amp IC can be faulty.
- The secondary coil antenna may be faulty.
Fix Xiaomi Mi 6X signal problems
Reboot your phone and Mi 6X and check. Remove and reinsert the SIM card and test. Switch between different network modes and control. Check if another SIM card is working and your SIM card or network operator may be having problems.
How to fix Mi 6X network error
Make sure that the device's firmware is ok or has been successfully restored or flashed. Try to upgrade to higher version and burn flash files just fine.
 |
| Xiaomi Mi 6X Network Ways |
IF the firmware calibration has been performed but nothing seems to happen, you can proceed to monitor, test or replace the respective components shown in the solution above.
Make sure that the condition of the PCB board is stable and not bent or damaged. Also, check for oxidation build-up, clean it up before you can continue.
First check the PA supply voltage, this is coming from the antenna terminal and you can monitor it between the capacitors shown on the solution above.
Please note that we will edit these solutions or add new solutions if found on this page at any time in the future. So please come back anytime on this page for updates.
Tags:
Xiaomi
