Xiaomi Redmi 8 Network Ways

There are many reports of Xiaomi Redmi 8 owners experiencing network signal problems, so we share this article to provide a comprehensive range of solutions. If you are a mobile technician and looking for a solution to troubleshoot your Redmi 8 network, you can follow our recommendations below.

The solution in this post can help to troubleshoot and repair Xiaomi Redmi 8 network problems. Make sure that the device's software has been restored, flashed or updated. This solution may only work if the device was damaged by water or by a heavy user drop. Xiaomi Redmi 8 no service, only emergency call and no signal error are among the common problems encountered by Xiaomi Redmi 8 smartphone users regardless of the brand and operating system the device is running on. running. When the problem occurs, you won't be able to send and receive text messages or make or receive calls on your device.

Xiaomi Redmi 8 network problem

• There is no network on your phone.
• Low signal.
• The phone only searches for the network, but is not connected.
• The signal drops continuously.

The reason for the network problem of Xiaomi Redmi 8

• Your SIM card may be faulty.
• Your network operator may be experiencing temporary difficulties.
• The GSM antenna contacts may be rusty or may have some dirt.
• The antenna lines do not fully communicate with the GSM antenna contacts.
• Any coils and capacitors of the antenna network or the Power Amp IC can be faulty.
• The secondary coil antenna may be faulty.

Repair Xiaomi Redmi 8 signal problems

• Reboot your Xiaomi Redmi 8 phone and check.
• Remove, reinsert the SIM card and test.
• Switch between different network modes and control.
• Check if any other SIM card is working.

How to fix network error Xiaomi Redmi 8

• Make sure that the device's software is successfully restored or flashed, try to upgrade to a higher version.
• If the software has been done but nothing happens, you can proceed to monitor, check or replace the respective components shown in the solution above.
• Make sure that the condition of the PCB board is stable and not bent or damaged. Also, check for oxidation build-up, clean it up before you can continue.
• Check the PA supply voltage, this is coming from the antenna connector and you can monitor it between the capacitors shown on the solution above.

Xiaomi Redmi 8 Network Ways

Please note that we will edit these solutions or add new solutions if found on this page at any time in the future. So please come back anytime on this page for updates.