Here we will share with you how to fix the problem of Xiaomi POCO M3 Speaker Ways, the speaker does not work. This solution can help in troubleshooting and repairing the phone.
In this guide, we will discuss how to troubleshoot Xiaomi Poco M3 audio problems. If your phone has no sound or you are having sound and volume problems of any kind then here are some things that you can try.
To repair the Xiaomi Poco M3 speaker, you can first clean the contact pads of the speaker connector on the PCB board if there is corrosion or oxidation. Then test the speaker with a multimeter to easily determine if it's working. If the speaker is confirmed to be ok, you can refer to the solution below and perform the check and test procedure on some components that are linked or connected to the external speaker circuit.
The reason for the sound problem on Xiaomi Poco M3
- The speaker may be faulty.
- Small speakers and distorted sound often occur when there is dust on the grid or faulty speakers.
- The coils may be faulty.
- There is no continuity between the contacts and the speaker coil.
- Problems with the speaker's onboard connector, this happens in very rare cases, and there's a one in thousand chance that the speaker problem is caused by a problem with the onboard connector.
Solution to fix sound problems on Xiaomi Poco M3
- Test speakers with a multimeter, replace if damaged. Distorted sound is due to weak speaker or it has burned out (internal coil is damaged).
- If the speaker is fine and there are no problems, make sure the terminal is not biased. Then, clean the speaker connector contact pads to avoid possible oxidation (which could weaken the connection).
- Check each speaker + and speaker - connection line path respectively to each component where it is being connected.
- If any + or - speakers are missing, then create a jumper.
There is no external microchip to control its incoming voice. There is no volume level option to equalize incoming caller's voice. You can do a little repair by cleaning the motherboard. Don't forget to dry your mobile phone motherboard after cleaning with electronics cleaner.
 |
| Xiaomi POCO M3 Speaker Ways |
If the mobile phone has water damage problem. Try to find some missing, burning capacitor or resistor on its motherboard. You can solve this by re-soldering or replacing any missing or damaged parts before replacing. Some timing headphones and its precise points are working fine. But the bell in mounting with the front panel has connection problems. In this case, you could try a wire that connects directly from the speaker's pins to its retaining pins. I have fixed this problem many times by re-soldering the latches of the speaker cushions.
Please note that while every solution posted on our website is checked by one or more members of our team before posting, we still do not accept any responsibility for any damages. what harm it can do to your mobile phone.
Tags:
Xiaomi
