Samsung Galaxy A03 Core SM-A032 Test Point

Erase pattern, password, fingerprint on Samsung Galaxy A03 Core with UFI Box you can easily solve it if you are an experienced Android software technician. If you have any questions please ask your questions in the comments section below, we will do our best to assist.

You can easily test Samsung Galaxy A03 Core SM-A032 Test Point by following the full instructions below along with images. By using ISP Pinout you can bypass FRP or reset user data on your device through EasyJTAG Plus Box or any other tool.

What is Pinout Samsung Galaxy A03 Core SM-A032?

In-system programming (ISP) allows communication to take place with the target chip without having to remove it. The main advantage of this approach is the ability to communicate with the eMMC of the target chip or the eMCP bypassing the CPU. It gives a higher data extraction rate than JTAG but it requires great soldering skills. ISP applies to forensics, which is the operation of connecting to an eMMC or eMCP flash memory chip for the purpose of downloading the entire contents of a device's memory.

Procedure:

  • You need to remove the back cover from your phone, remove the battery from the motherboard, the fingerprint sensor and the existing camera.
  • Remove the screws from the motherboard, take it out, and put it in a safe place.
  • On your motherboard, locate the six eMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC, and VCCQ.
  • Open the UFI and take the adapter out of it, you will see the same pins in the adapter that I mentioned in the previous step.
  • Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
  • Put the adapter inside the UFI box, connect the box to the computer.
  • Connect the motherboard to the phone's battery, put the USB cable in the phone and connect it to the computer.

Samsung Galaxy A03 Core SM-A032 Test Point

Repair Samsung Galaxy A03 Core SM-A032 lost boot or any brand phone you need two best protectors on the market, one is easy jtag plus and the other is ufi box both are the best on the market. market. These boxes help some phones after flashing wrong firmware don't show boot on screen, you need those boxes for boot repair.

Đăng nhận xét

Mới hơn Cũ hơn