By using Samsung Galaxy A12 SM-A127F Test Point you can easily restore original ROM, bypass FRP, Remove MDM password loss mode (Device Lock, No Downloads Mode, No Recovery) and Remove FRP Direct with Easy Jtag Plus Or UFI Box. In this tutorial, we will share with you images of pinout and UFS test point for Samsung Galaxy M21S M217F.
You can easily search Test Point Samsung Galaxy A12 SM-A127F by following the complete instructions below along with the image. By using ISP Pinout you can bypass FRP lock or reset user data on your device through Easy Jtag Plus or any other tool.
Samsung Galaxy A12 SM-A127F What is ISP Pinout?
In-system programming (ISP) allows communication to take place with the target chip without having to remove it. The main advantage of this approach is the ability to communicate with the eMMC of the target chip or the eMCP bypassing the CPU. It gives a higher data extraction rate than JTAG but it requires great soldering skills. ISP applies to forensics, which is the operation of connecting to an eMMC or eMCP flash memory chip for the purpose of downloading the entire contents of a device's memory.
Procedure:
- You need to remove the back cover from your phone, disconnect the battery from the motherboard, the fingerprint sensor and the existing camera.
- Remove the screws from the motherboard, take it out, and put it in a safe place.
- On your motherboard, locate the six eMMC pins. The pins are Dat 0, CLK, CMD, GND, VCC, and VCCQ.
- Open the UFI and take the adapter out of it, you will see the exact same pins in the adapter I mentioned in the previous step.
- Solder 4 pins: Dat0, CLK, CMD and GND with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
- Put the adapter inside the UFI box, connect the box to the computer.
- Connect the motherboard to the phone's battery, put the USB cable in the phone and connect it to the computer.
 |
| Samsung Galaxy A12 SM-A127F Test Point |
Repair Samsung Galaxy A12 SM-A127F lost boot or any brand phone you need two devices, one is easy jtag plus and the other is ufi box both are the best in the market. These boxes help some phones after flashing wrong firmware not showing boot on screen.
Tags:
Samsung
