You are trying to flash or bypass FRP on your Samsung Galaxy A52s A528B phone. That means you need to use Samsung Galaxy A52s A528B 5G Test Point to flash stock firmware, Remove Locks and FRP.
 |
| Samsung Galaxy A52s A528B 5G Test Point |
You can easily get the UFS ISP Pinout connection of your Samsung Galaxy A52s 5G by following the full instructions below along with the image. By using ISP Pinout you can easily bypass FRP or reset user data on your device through Easy JTAG Plus Box or any other tool.
Schematic image of Samsung Galaxy A52s A528B 5G UFS ISP
- You need to take the back cover out of the phone, remove the motherboard from the battery, fingerprint sensor and camera.
- Remove the screws from the motherboard, take it out, and put it in a safe place.
- On your motherboard, locate the six eMMC pins: TxOp, TxOn, RxOp, RxOn.
- Open the UFI and take the adapter out of it, you will see the same pins I mentioned in the previous step.
- Solder 4 pins: TxOp, TxOn, RxOp, RxOn with jumper between motherboard and adapter. Leave VCC and VCCQ for USB to power them.
- Place the adapter inside the UFI box. Connect the box to the computer.
- Connect the motherboard to the phone's battery, put the USB cable in the phone and connect it to the computer.
Lock FRP Samsung Galaxy A52s A528B with EasyJTAG Plus:
- Remove the back of the device and connect the wire to the UFS ISP Pinout.
- Correctly connect UFS ISP Pinout to EasyJTAG Plus box
- Check "UFS" tab
- Then click "Identify UFS Chip".
- Connect your Samsung Galaxy Note 10+ to your PC via USB cable.
- Go to Preset Select Persistent
- Now click Erase LUN0 Data
- Accomplished.
Tags:
Samsung
